當前位置：主頁>產品列表>粉碎研磨設備>粗碎機（CE）
粗碎機（CE）
Rough Crusher
( CE Approved )
1. 概述( Description )：
粗碎機廣泛應用于制藥工業，食品工業，化學，橡膠，電子工業等領域。
Rough crusher is a kind of crusher widely used in pharmaceutical industry ,food industry , chemical industry, Rubber industry ,Electrical industry ,etc… .?
2. 原理( Principle )：
整個系統包括固定的定刀和高速旋轉的勾狀刀或者剪切式動刀，動刀下面固定一張多孔網，網孔的大小可選，物料從上部的進料口流入，被動刀和定刀撕碎或切碎，小于篩網孔徑的物料穿過篩網排出，其余大塊物料繼續在里面破碎，當動刀旋轉的時候，會產生正壓，有氣流產生，若用于固體粉碎，可能會產生粉塵，一個額外的除塵器需要安裝在粗碎機的旁邊，用來收集從粗碎機出來的粉塵。
The whole system include a fixed knife and a high speed rotating knife group , a net under the knife , the net hole size is selectable , material come in from the top inlet and was crushed by rotating knife and fixed knife , the crushed material which size less than net hole can come out , other big briquettes was continuously crushed by rotating knife. ?when knife rotating , some pressure and air flow generated ,if for crush solid material without moisture , one additional filter beside the crusher for collect the dust from the outlet of crusher is necessary .
3、應用范圍（ Application Scope ）
適用于需要將原料破碎成顆粒，篩網的孔徑一般在10 -20mm 。
It is suitable for the raw materials that need to be crushed into granules , the net size normally in10 to 20 mm
4、技術參數Technical parameter
型號Model |
CSJ-100 |
CSJ-200 |
產量Capacity（kg/h) |
50-300 |
50-700 |
進料粒度 |
≤50 |
≤50 |
出料粒度 |
5-20 |
5-20 |
裝機功率 |
3 |
7.5 |
轉速 |
400 |
400 |
外形尺寸 |
700×600×1270 |
1080×950×1450 |
重量 |
300 |
800 |
Note: customized equipment is acceptable for us .
CE & UL requirement is acceptable for us .